How to paint radiator?

Painting cast iron pits – not so difficult that it cannot be done on their own, conserving a fair amount of money. In addition, you’ll be assured in the quality of the work.

What’s required as a way to cope with this job? To qualitatively paint the battery, you’ll need the perfect paint, in addition to knowledge of several technological”secrets” of this process . Paints

When painting heating batteries, special requirements are made to their coating: they must be resistant to constant exposure to elevated temperatures, abrasion, in addition to long maintain customer properties, that is, an appealing overall look. The following compositions are most suitable for painting cast iron batteries:

Alkyd enamels.

Pros: when warmed up to 90 degrees, they retain strength, don’t”peel off”, resistant to abrasion.

Cons: for a very long time holds a specific odor, coating immediately turns yellowish, may be dimmed.

Water-dispersion oil enamels.

Pros: fast drying, no odor after drying, color fastness which can be varied with international tints.

Disadvantages: limited choice – maybe not all enamels in this group will withstand high temperatures.

Acrylic enamels on solvents.

Pros: does not need pre-treatment before painting heating batteries, resistant to high humidity and temperatures, polished surface, so long retains its original colour.

Disadvantages: Necessity to utilize solvent, inability to use universal colors to modify the color shades.


To paint the battery, then You Have to have, along with the selected tooth:

  • Cleaner for the old paint coat,
  • glue,
  • primer with anti-corrosive properties and also a set of brushes.

One brush can’t dofor hard-to-reach areas require a little, on a very long handle, for the outer surfaces fit a wider, which can put the paint more evenly and also help you save time.