Technology of Placing gypsum tiles with your hands

Gypsum tiles have to be laid properly, as not only the aesthetic appearance of cosmetic facing, but in addition the service

quality of the substance will be based on the technology of job. The product is more universal, and it can be attached to plaster,

concrete, brick or gypsum board sheets, provided the top layer of the foundation is and has no flaws.

In the event the defects of this foundation are important, it ought to be thoroughly treated with primer, and then a cement mortar

is made, which matches all of the cracks. Then the surface should be repeatedly primed and dried. Primer therapy is necessary to

improve the bond between the tile and the walls. In this case, its makeup should decide on a particular, containing elements that

prevent the look of fungus and mold.

In today’s interior of the rooms most often used gypsum tiles, imitating natural stone or brick. To execute cosmetic finishing

yourself, it is essential firstly to pick a strategy of tile placement and prepare a solution. It is important to look closely at

the opposite side of the material. If its surface includes an embossed surface, then the glue should be put with an trowel, and if

it is even, then using a notched one.

The tech of the job is as follows:

* A thin layer of adhesive is placed on the pre-prepared wall. It is distributed over the foundation so it is possible to place

4-5 tiles. Decorative cladding may be placed either on plasterboard, and on putty.

* Cover the back side of the tiles with adhesive.

* Plaster elements are pressed against the wall and their place is adjusted. To align with the seams, it is suggested to use


* Finishing is carried out in rows, each of which should be shifted by half a tile. Facing is completed to the corners of this

space, then immediately remove any remaining mortar in the joints.

Drying the walls requires no more than a day and takes a constant humidity and temperature inside the room. The last point in the

placing of gypsum tiles is their decor. To do this, the joints between the components are full of a particular solution, the shade

of which suits the brick.

Cosmetic fake of brickwork on the walls is completed in the following manners:

* Cutting on the darkened surface of the seams of masonry with a bolt cutter along with your own hands;

* laying of tiles beneath the brick:

* imitating the structure and color of the side surface of a single brick;

* Imitating a fragment of brickwork of several bricks.

The best approach to decorate”under the brick” is the one which allows you to create a functional coating with the maximum

appearance of its similarity to natural masonry. All 3 strategies to carry out this sort of finishing works meet the needs, but

the cutting edge of joints with a bolt is more labor-intensive as well as the formation of considerable quantities of dust, so let

us consider more common manners.

The old finish is removed from the walls, and the outside, if necessary, is leveled to eliminate the need to paste plaster onto a

thick layer of adhesive.

Combining these cladding with other types of interior finishes may be both systematic and performed with no clear consequences,

chaotically, together with fake of signs of aging.

With the support of decorative gypsum tiles it is possible to imitate a large number of textures.

A large number of textures may be imitated with the help of decorative gypsum tiles.

The wall on which it is to be installed must possess the following attributes:

* Hardness and durability of the outside;

* The absence of uneven places and sharp gaps;

* not any deformations.

Decorative tiles at the interior of this kitchen

Walls are created from a number of substances, so let’s break down the individual rules of installment.

When dealing with concrete, there will not be any big problems. It is just essential to take into consideration the porosity of

this material. Concrete, which has almost no pronounced pores, should be treated with a fantastic primer.

Mounting gypsum tiles concrete

Before starting work on the installation of gypsum tiles onto the walls, it’s well worth checking the strength of the surface.

When the plaster does not drop off the wall and at exactly the same time holds nicely, it is possible to simply paint it with


Mount the tiles on the painted concrete should not. The surface ought to be scratched, making sure to misfire, and it needs to be

grouted and coated with a coating of plaster.