Features of Allergic Harvest PC

The entire set for the building of a 4-meter greenhouse 3 sheets of mobile polycarbonate in the form of rolls of 2.1 m length and a diameter of 60-90 cm. The depth of this material is 4 mm.

If you want, you are able to increase the period of the construction to 6 yards or longer. To do this, it’s sufficient to join a two-meter extension. When selecting a drawing, focus on the distance between the arches. This figure must be 65 cm, that’s the most appropriate length for the specified depth of this material. The diameter of the doors according to the manufacturer’s drawing is 90 cm.

Before assembling a polycarbonate greenhouse, it is necessary to pick a location because of its location. If this is done properly, it is possible to provide yourself with a crop of fresh vegetables for the whole calendar year.

The location for your future greenhouse is marked immediately in the preparation of the garden plot. To be able to melt the snow in the place of their greenhouse as soon as possible, the best point on the site will be a small elevation. In addition, in such a location will not have to be concerned about high humidity as soil and air inside the building.

Assemble a polycarbonate greenhouse in a raised site – means to take care of the best temperatures indoors.

When it is not feasible to place a greenhouse on an elevated position, you’ll have to pour a layer of fine shattered rock around 20 cm and the identical layer of fertile soil to make seedbeds.

Before building a greenhouse in your backyard plot, you should also think about where and how this construction is going to be installed. First, you have to select a location for this. The greenhouse should be located in a metropolitan region no less than a few meters away from homes, barns and other structures.

The best way to install a greenhouse in Line with the sides of the Planet

Be sure to measure the soil surface – it is ideal to even remove the top layer. This will also eliminate weed seeds. And for ease of work, eliminate the dirt in an area that’s about a meter wider on all sides of the rectangle that you want.

In addition, it is worth thinking about having a base. As producers say, today most greenhouses do not need that, especially if they (greenhouses) are utilized just in the spring and summer time. But, experienced gardeners still suggest earning a basic basis from a bar. It’s extremely simple – it is sufficient to link with each other using metal screws and corners four pieces of wood with a cross-section of 10 * 10 cm. The dimensions of such a base should be equal to the base of their upcoming greenhouse.

Simple bar foundation

You might also produce a strip base of concrete. He’s more dependable than a pub foundation, but requires more fiscal and labour costs. Incidentally, the rainwater, which will be utilised in the winter, without it and do not do with it whatsoever.

Stages of the formation of a strip base: a schematic representation

Many producers advise to put in greenhouse structures without building a foundation. For this function, they equip the frame with special T-shaped legs, so that the construction was securely fixed. However, as practice shows, it’s still essential to construct a base: so and the basis will be more firmly fixed and the elements of the basis in contact with the soil, will be kept much longer in its initial condition.

The most important thing is to deal with the material with special agents to protect the wood from moisture. The substance is normally installed on concrete blocks which are dug into the ground. To get a six-meter structure, they need 10 bits: four on each side and one in the center of the ends.

Before you perform the greenhouse , you have to select the ideal location for this. It has to be an even site, so the framework was found evenly, without distortions. It should be sunny and not obscured by trees or buildings.